CY-ANH-A1100 is pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic1,3-Pentadiene (1,3-piperlene) and isoprene derived from the process of thermal cracking of naphtha. As a kind of sticky resin, CY-ANH-A1100 has played an important role in adhesive and sealants industries. It is adequate for hot-melt adhesive. It’s not only has good compatibility with SIS, SBS, SEBS, SEPS and other styrene polymers, natural rubber, synthetic rubber as well as EVA and natural sticky resins, but also the performance of the adhesive have different degrees of improvement, and promote viscous, sticky and holding has risen markedly, Due to its improved peel strength, adhesion and stability, moderate melt viscosity, heat resistance good compatibility with the polymer matrix is good, and the price and low, has been widely used in hot melt adhesives, pressure sensitive adhesives and other industries
Applications:
Hot melt adhesives, Pressure sensitive adhesives, Sealant, Sealing Tape, Adhesive tape, Electrical tape and other adhesive glue.
Product specifications, technical data, MSDS and product images:
Index Item | Test Method | Unit | CY-ANH- A1100 | Specifications | MSDS | The picture of the Resin | |||
Softening Point | ASTM E28-58 | ℃ | 95-105 |
|
|
| |||
Color (Ga#) | ASTM D-1544 | # | 5 | ||||||
Acid Value | ASTM D-974 | mgKOH/g | Max0.5 | ||||||
Bromine Value | HG2231-91附录A | gBr/ 100g | 30~50 | ||||||
Wax Cloud | ASTM D2500 | ℃ | Max136 | ||||||
Specific Gravity | ASTM D71-72A | g/cm3 | 0.96~0.98 | ||||||
Melt Viscosity | ASTM D3835 | mpa.s | Max250 | ||||||
Ash Content | ETM-E-99 | Wt% | 0.1Max | ||||||
Application | Hot melt adhesives, Pressure sensitive adhesives, Sealant, Sealing Tape, Adhesive tape, Electrical tape and other adhesive glue. | ||||||||
